Version
2.7 released 2-27-2005
WxByte
1.
The program now removes the tracking file when the product is
received with no problems.
2.
The main form now displays information on the packets
received. It also
displays the current server’s IP address along with the total
amount of connect time.
3.
The program now records the number of packets received along
with error information in the iblog.txt file.
It is in the same format as WxIngest.
4.
Changed the packet decoding routine to process each packet as
it arrives. It was
always leaving one packet in the buffer.
5.
Change the processing routine to operate every 250
milliseconds.
6.
The block statistics recorded in the iblog.txt now contains a
second line showing the error details, if errors occur during the
1-hour reporting period.
7.
Discovered a problem in the header validation that would
cause a data packet filled with binary zeros to be rejected with a
check sum error. This
caused a problem with a small number of the ZIS files.
8.
Reduced the default time-out period to 15 seconds.
The minimum value was reduced to 10 seconds.
WxIngest
1.
The program now removes the tracking file when the product is
received with no problems.
2.
Now reports to the byte blaster server when it stops sending
data.
3.
The block statistics record in the iblog.txt now contains a
second line showing the error details, if errors occur during the
1-hour reporting period.
4.
Discovered a problem in the header validation that would
cause a data packet filled with binary zeros to be rejected with a
check sum error. This
cause a problem with a small number of the ZIS files.
Weather Message Server
1.
The server now sends the server version number to the client
when it connects.
2.
The View Connections screen now prints the version number of
the client. This
requires a version 2.7 client to be connected.
3.
The Message Decode routine now removes hex 1E characters from
messages. This corrects
a problem with the SWOMCD message.
4.
Now support multiple email, paging and fax groups per
alarm line.
5.
The short message variable $HeadLine$ normally includes
headlines for the specific UGC group alarmed.
Several messages now have headlines before the UGC groups and
no headlines within the individual UGC groups.
The program will now check for this condition and use the
headlines prior to the UGC groups, if no headlines were found inside
the alarmed UGC group.
6.
The connections status screen will now automatically refresh
the connections every 15 seconds.
7.
Added support for 250 user connections.
8.
Changed the retry limit when reading files from the ingest
directory. Some users
were still experiencing error 70’s – permission denied.
WxMesgSetup
1.
The VTEC phenomena list box sorts after all items have been
selected.
2.
Now supports multiple email, paging and fax groups.
3.
Updated the county fips file with the latest changes from the
map database.
4.
Updated the states file.
Removed MP and UM – they were combined with HI and GU.
5.
The program will no longer allow a group name to be entirely
numeric. This
compensates for the error 35603 reported by the Microsoft Listview
control when keys are entirely numeric.
6.
Added a “Collectives” option under the Support Setup
menu. This option will
allow you to setup a path to store the raw SAHOURLY.txt file.
7.
Removed the automatic alarm file conversion from
version 1.x To version 2.x. Existing
version 1.x users wishing to update to version 2.7 will need to load
and save their alarm file using version 2.6, prior to upgrading to
version 2.7.
8.
Added the ability to specify the days of the week allowed for
the time restrict option.
9.
Added additional fields to the WxAlarm.txt file for future
updates.
10.
Added a text exclude option to the alarm item screen.
Text entered in this field will be checked in the received
text. If it is found,
the alarm will be disabled.
11.
The Options window now allows you to set the type of timeout
that is used for Ftp operations.
Check the Absolute Time box to make the timeouts absolute. With this option checked, if the ftp operation does not
complete within the time specified in the timeout box, the operation
will be aborted.
12.
The Options window now allows you to setup the timeout value
for Http operations. Http
operations previously used the ftp timeout value.
13.
Changed the ipinfo.ocx back to version 5.0.
This makes this release compatible with Windows NT.
14.
The Options window now allows you to enable “county
delimiters”. This
option is enabled by default and will instruct the software to
insert comma’s between county names.
If there are more than one county, the comma is changed to an
“&” sign between the last two counties.
15.
The word “County” used in the short paging format will
now change to “Counties” where there is more than one county.
16.
Changed all programs to support XP Style screens, when
running on XP.
17.
The Product.dat file now contains three additional fields to
indicate if the product contains a UGC line, a VTEC line and if the
UGC line contains both Fips and Zone codes.
Note: The
product file will have to be updated with the correct information
for these new fields.
18.
Updated the county zone files to agree with service change
notice 05-02.
19.
Establishing a group specific VTEC line will now be saved
when the group specific short message text is the same as the
default.
WxMcli
Message Client
1.
Program now sends the client version number to the server.
2.
Made a change in the form unload event to make sure the
winsock control was properly unloaded.
3.
The default installation will now include AirRaid.wav and it
will be associated with alarm type 3.
4.
Quick List items 11 through 20 will now work properly.
Clicking on items 11 through 20 would not launch the view
window.
5.
Added a status bar to the main window.
6.
Moved the red / green connection led to the status bar.
7.
When the program plays a sound for one minute or
continuous, it will now display a silence button to the right of the
view alarm button. The
button will only appear during the one minute or continuous play.
WxMap
1.
Program now sends the client version number to the server.
2.
Made a change in the form unload event to make sure the
winsock control was properly unloaded.
3.
Updated the county map with the latest release – dated
11-4-2004. (Full install and Client only install.)
4.
Added support for exporting the map image in “bmp” and
“tif” file formats.
5.
Added a Base Map tab to the setup screen.
This tab allows you to set the viewer background, county
default background, line width and transparency.
6.
Added the ability to attach notes to each county.
Right click on the county and select Show Notes.
This option will allow you to enter notes on the county.
This text is saved in the ..\wxmesg\map\notes directory using
the name “Not” plus the county’s state and fips number along
the extension “rtf”. Using “rtf” files allow you to add formatting with Word
or notepad.
7.
The Map Save Interval can now be set to zero.
When the Map Save On Change option is checked and Map Save
Interval is set to zero, the map will only be saved when it changes.
8.
Added a status bar to the main window.
9.
Moved the red / green connection led to the status bar.
10.Changed the program to handle WOU messages like SLS.
WxFtp
1.
Will no longer append an extra carriage return to the files
being sent.
WxWw2000
1.
The system tray icon will now alternate colors when it is
connected to the Internet data source.
2.
Now records serial port errors in the log file.
3.
The program now creates the Winsock control regardless if
whether it is used. This
corrects error 91 that shows up in the logfile.
WxLoader
1.
Added WxLoader web upload utility. See the
documentation for more information.
|